Leisure Time pH Balance Plus - 3 Pounds
pH Balance Plus works to lock in the proper pH level in your hot tub to prevent unnecessary, costly and time consuming pH adjustments. This unique granular formula will prevent your pH from fluctuating from the time you refill the hot tub with fresh water until the time you drain it.
All you have to do is check the pH level of your hot tub upon filling it up and adjust it to within the recommended pH range. Then add pH Balance Plus and you are set until you drain and refill the water.
Directions for use:
The proper pH range for hot tub water is 7.2 to 7.6. pH Balance Plus will help keep the hot tub water within the proper range. Test the pH weekly and adjust if needed.
1. In a freshly filled ho tub, test the pH. If pH level is between 7.0 and 8.0 proceed to step 2. If it's not within this range, adjust with pH Up or pH Down until it's within the 7.0 and 8.0 range and proceed to step 2.
2. Add 1.5 pounds (half the jar) of pH Balance Plus for up to 250 gallons of hot tub water or the entire 3 pounds for up to 500 gallons of hot tub water. Pour directly into hot tub.
3. Turn ON jets and allow water to circulate for 15 minutes. Temporary cloudiness may occur, but the water will clear quickly once the product is full dissolved.
4. Repeat the application each time you refill your hot tub with fresh water.
Leisure Time 45410A